1.888.610.7664

sales@GlobalTestSupply.com

Customer Reviews
Cart (0)
|
My Quote (0)

Dent RoCoil TCA-5 5A Transconductance Amplifier

Model: TCA-5-AO

Dent RoCoil TCA-5 5A Transconductance Amplifier-

Downloads: datasheet

Dent RoCoil TCA-5 5A Transconductance Amplifier

Model: TCA-5-AO

RoCoil TCA-5. 5A Transconductace Amplifier. For use with DENT RoCoil CTs. Includes Amplifier Only. Does not include power supply or RoCoil CTs.

RoCoil TCA-5. 5A Transconductace Amplifier. For use with DENT RoCoil CTs. Includes Amplifier Only. Does not include power supply or RoCoil CTs.

Discontinued!

This product has been discontinued and is no longer available.

There is no direct replacement, however we recommend the:

Accuenergy RIK 5A Series Rogowski Integrator Kits-

Accuenergy RIK 5A Series Rogowski Integrator Kits

Model: RIK 5A Series | Order No: RIK 5ASeries

These easy-to-install plug-n-play solutions can be used with any power meter or equipment with a 5A current transformer input. They allow the installation of rogowski coil CTs in a variety of applications and configurations where spacial constraints may limit the use of other CT solutions. The RIK kit is designed around a three channel 5A output integrator and includes with it three Accuenergy Rogowski coil current sensors, and one power supply. All of these parts are further configurable for the needs of many applications.

Learn More

Not what you're looking for? Let’s do a search and help you find what you need.

Recommended Accessories

Dent CT-R36-A4-U RoCoil Flexible Current Transformer, 35"-

Dent CT-R36-A4-U RoCoil Flexible Current Transformer, 35"

CT-R36-A4-U

Dent TCA-5-AO Offers

The RoCoil TCA-5 is a three-channel integrating transconductance amplifier (TCA) that converts the 131mV/1000A electrical output signal from the RoCoil current sensor to a 5 amp AC current, emulating a traditional current sensing transformer.

The RoCoil TCA-5 is factory-calibrated to work with DENT RoCoil CTs (131mV/1000A). The unit can be DIN or panel mounted and a 10" section of TS35/7 DIN rail is included with the kit.

Key Features:

  • The RoCoil TCA-5 has been factory-calibrated for use with DENT RoCoil CTs
  • Output current is between 0-5.00 Amps (RMS)
  • Available RoCoil sensing ranges are 500, 1K, 2.5K, and 5K Amps (selectable)
  • Use on three-phase or single-phase systems
  • 50/60 Hz
  • Accuracy: 1%. Consult data sheet for details
    • cULus Listed (Must be used with DENT Instruments' supplied Power Supply to maintain UL listing.)
  • CE Mark
  • One year warranty

Dent RoCoil TCA-5 5A Transconductance Amplifier Specifications

Power Requirements
TCA Supply Voltage 48 VDC +/- 10%, 30 Watts
Dimensions/Mounting
Width—Base Unit15.7 cm (6.2")
Width—As Assembly25.0 cm (9.8")
Height—Base Unit9.0 cm (3.5")
Height—As Assembly12.6 cm (5.0")
MountingTS35/7 DIN Rail or Panel
Input Wire Connection18—28 AWG
Output Wire Connection12—18 AWG (length dependent)
Click here for complete specifications on the Dent TCA-5-AO

What's included with the Dent TCA-5-AO

  • Dent RoCoil TCA-5 5A Transconductance Amplifier
datasheet for the Dent RoCoil TCA-5 5A Transconductance Amplifier

Accessories

Click on a category to view a selection of compatible accessories with the Dent RoCoil TCA-5 5A Transconductance Amplifier.

Dent CT-R36-A4-U RoCoil Flexible Current Transformer, 35" CT-R36-A4-U
Designed for accurate non-intrusive measurement of AC current, pulsed DC or distorted waveforms where conventional rigid core CTs are unsuitable. This type of sensor may be used to measure AC current over a wide dynamic range and from 20 Hz to 5 kHz. It features a length of 35".
$206.00 USD

Learn More

Ask a question about Dent RoCoil TCA-5 5A Transconductance Amplifier

Customer Reviews for the Dent TCA-5-AO

Dent TCA-5-AO Offers

The RoCoil TCA-5 is a three-channel integrating transconductance amplifier (TCA) that converts the 131mV/1000A electrical output signal from the RoCoil current sensor to a 5 amp AC current, emulating a traditional current sensing transformer.

The RoCoil TCA-5 is factory-calibrated to work with DENT RoCoil CTs (131mV/1000A). The unit can be DIN or panel mounted and a 10" section of TS35/7 DIN rail is included with the kit.

Key Features:

  • The RoCoil TCA-5 has been factory-calibrated for use with DENT RoCoil CTs
  • Output current is between 0-5.00 Amps (RMS)
  • Available RoCoil sensing ranges are 500, 1K, 2.5K, and 5K Amps (selectable)
  • Use on three-phase or single-phase systems
  • 50/60 Hz
  • Accuracy: 1%. Consult data sheet for details
    • cULus Listed (Must be used with DENT Instruments' supplied Power Supply to maintain UL listing.)
  • CE Mark
  • One year warranty
Show More...

Dent RoCoil TCA-5 5A Transconductance Amplifier Specifications

Power Requirements
TCA Supply Voltage 48 VDC +/- 10%, 30 Watts
Dimensions/Mounting
Width—Base Unit15.7 cm (6.2")
Width—As Assembly25.0 cm (9.8")
Height—Base Unit9.0 cm (3.5")
Height—As Assembly12.6 cm (5.0")
MountingTS35/7 DIN Rail or Panel
Input Wire Connection18—28 AWG
Output Wire Connection12—18 AWG (length dependent)
Click here for complete specifications on the Dent TCA-5-AO

What's included with the Dent TCA-5-AO

  • Dent RoCoil TCA-5 5A Transconductance Amplifier
datasheet for the Dent RoCoil TCA-5 5A Transconductance Amplifier

Accessories

Click on a category to view a selection of compatible accessories with the Dent RoCoil TCA-5 5A Transconductance Amplifier.

Dent CT-R36-A4-U RoCoil Flexible Current Transformer, 35" CT-R36-A4-U
Designed for accurate non-intrusive measurement of AC current, pulsed DC or distorted waveforms where conventional rigid core CTs are unsuitable. This type of sensor may be used to measure AC current over a wide dynamic range and from 20 Hz to 5 kHz. It features a length of 35".
$206.00 USD

Learn More

Ask a question about Dent RoCoil TCA-5 5A Transconductance Amplifier

Customer Reviews for the Dent TCA-5-AO

More Dent Products