Home » AEMC 8220 Single Phase Portable Power Analyzer
AEMC 8220 Single Phase Portable Power Analyzer
AEMC 8220 Single Phase Power Analyzer is a measurement tool for electrical parameters and distribution network disturbances, enabling the user to obtain instant measurements of the main characteristics of a single-phase network (voltage, current, power, voltage and current harmonics, etc.) and to monitor machinery in operation (temperature, inrush current and duration of operation, distance of windings and rotational speed).
AEMC 8220 is capable of AC + DC measurements and features an electroluminescent backlit digital display and is rated to 600V Cat III.
The AEMC 8220’s accuracy is better than 1% (excluding current sensors). It has a great flexibility due to AEMC’s range of current sensors, measuring from a few hundred milliamps to several thousand amps. See the available kits below that include current transformers.
The 8220 Single Phase Power Analyzer is designed for technicians, control and maintenance engineers, as well as electrical contractors and educators.
Applications:
What's Included:
AEMC 8220 is capable of AC + DC measurements and features an electroluminescent backlit digital display and is rated to 600V Cat III.
The AEMC 8220’s accuracy is better than 1% (excluding current sensors). It has a great flexibility due to AEMC’s range of current sensors, measuring from a few hundred milliamps to several thousand amps. See the available kits below that include current transformers.
The 8220 Single Phase Power Analyzer is designed for technicians, control and maintenance engineers, as well as electrical contractors and educators.
Applications:
- Measurement and recording of power system quality (kW, VA, VAR)
- Energy metering (kVAh, VARh, kWh)
- Motor start-up analysis
- Measure RPM
- Determine phase rotation
- Detect hot spots (temperature) in wiring and equipment
- Verification of power distribution circuits
- In plant troubleshooting of power distribution panels and individual machinery
What's Included:
- Set of two 10 ft (3m) color-coded leads (red/black) with alligator clips
- Set of safety test probes (red/black)
- Optically isolated USB cable
- Set of six 1.5V AA batteries
- DataView® software FREE for data storage, real-time waveform display, analysis and report generation
- Carrying bag
- Product warranty card and user manual.
The Good:
The Bad:
The Bottom Line:
The Bad:
The Bottom Line:
Full Review
- Measures up to 660Vrms or VDC
- Measures up to 6500AAC or 1400ADC (probe dependent)
- Displays Min, Max and Avg Volts and Amps, Crest Factor, Peak and K-Factor
- Calculates and displays Watts, VARs and VA, Power Factor and Displacement Power Factor for single-phase and balanced three-phase
- Displays THD for voltage and current
- Displays individual harmonic values for Volts and Amps through the 50th harmonic
- Captures and displays inrush current phase rotation and RPM
- Displays temperature in °F or °C
- Displays resistance up to 2000Ω and conducts continuity and diode tests
- Stores up to nine complete sets of readings for all volt, amp, power, harmonics and other measurements
- Configurable from DataView® software or front panel
- Includes DataView® software free for data download and storage, real-time waveform display, analysis and report generation
Harmonics | Voltage  |
Inrush  | Temperature |
Power | RPM |
SPECIFICATIONS
|
|
|||
|
MODEL |
|
8220 |
||
|
ELECTRICAL |
|
|||
|
Voltage (TRMS) |
Phase-to-Phase:
660V Phase-to-Neutral: 600V |
|||
|
Current (TRMS) |
MN Clamp: 5mA to
120A or 2 to 240A MR Clamp: 10 to 1000AAC, 10 to 1400ADC SR Clamp: 3 to 1200A AmpFlex®: 10 to 6500A(1) |
|||
|
Frequency (Hz) |
40 to 70Hz |
|||
|
Other Measurements |
kW,
kVAR, PF, |
|||
|
Harmonics |
1st to 50th |
|||
|
Sampling Frequency |
256 samples |
/ |
cycle
|
|
|
Data Storage |
Stores
nine sets of readings for volts, amps, power and harmonics |
|||
|
Power Source |
Six 1.5V AA Alkaline
batteries |
|||
|
|
AC
Supply: 120/230VAC (50/60Hz) – optional |
|||
|
|
≥Eight hrs with
display on |
|||
|
MECHANICAL |
|
|||
|
|
Optically isolated
USB |
|||
|
Display |
Three-line
backlit digital display with custom icons |
|||
|
Dimensions |
8.3 x 4.3 x
2.4" (211 x 108 x 60mm) |
|||
|
Weight |
1.9 lbs (8.8kg) |
|||
|
Safety Rating |
EN 61010, 600V Cat. III, IP 54, Pollution
Degree 2 |
|||
DataView Professional is a full-featured data collection, analysis and reporting software package which includes great flexibility for customization of views, templates and reports to meet the most demanding requirements, combined with the ability to present trend graphs, waveforms and data in real time on a PC.
DataView Software Features:
- Display and analyze data on your PC
- Configure all data logger functions and parameters from your PC including sample rate, recording length, channel configuration & More
- Customize frames, templates and reports to your exact needs
- Display real time data on your PC and download previously recorded data
- Create and store a complete library of configurations that can be uploaded to the logger as needed
- Zoom in and out and pan through sections of the graph to analyze the data
- Display waveforms, trend graphs, harmonic spectrums and text summaries
- Display Surge & Sag events in high-resolution waveforms and as tabular listings
- Insert annotations & graphic objects from other applications
- Customize colors and fonts
Requirements:- Windows XP /
Windows Vista / Windows 7 (32/64 bit)
- 256MB of RAM for Windows XP
- 1GB of RAM for Windows Vista & Windows 7 (32 bit)
- 2GB of RAM for Windows Vista
& Windows 7 (64 bit)
- 80MB of hard disk space (200MB recommended )
- CD-ROM drive
Real-time waveform and harmonics display using DataView software
Product brochures
Technical training
Product manuals
No user reviews available.
