These voltage dataloggers have a wide variety of applications but mostly they are used for load profiling, fault voltage and current detection, residential power monitoring and intermittent problem detection. Find a wide selection of meters to fit your application.
High accuracy, a deployment friendly LCD and up to four external sensors for measuring temperature, current, CO2, voltage and more.
High-accuracy, easy-to-deploy, records the power and energy consumption of 120V plug loads.
Precise True RMS multimeter with 50,000 count backlit display and digital analog bargraph.
Precise True RMS multimeter with 50,000 count backlit display and digital analog bargraph. This product includes NIST Traceable Certificate with full Data and Uncertainties.
True RMS voltage recording up to 600VA C/DC. 64 samples per cycle.
This power quality data logger has 4 displays, one each for W, PF, V and A. It takes TRMS measurements and datalogs 1012 points of measurements.
Comes with built-in test leads and safety alligator clips for voltage measurements. Measure AC voltage up to 600V.
Download and analyze all your recorded data directly to your PC. It will record up to 90 days of data.
Safe for all electrical environments, with a 1000V CAT IV rating. It measures up to 1000V AC, 1000V DC, and AC/DC at a resolution up to 10mV as well as up to 1000A AC and 2000A DC. This power clamp meter measures power parameters of single- and three-phase systems, including in rush current and frequency. This meter can store up to 1000 measurements and is enabled for Bluetooth communication.
Safety rated at 1000V CAT IV, it is safe to operate in all electrical environments. It's rugged enough for the most demanding environments and will withstand both dust and water spray with their IP54 rating. Measures True RMS, 1000V AC/DC, 2000A AC/3000A DC, Ohms, Continuity, Energy, Harmonics, Power, THD, and Recording.
Four channel logger with AC/DC voltage inputs that directly measure and record up to 600V.
One channel datalogger for voltage measuring, monitoring and troubleshooting. Features bipolar voltage recording up to ±850V DC.
Provides a choice of data storage modes and storage rates allows the operator to effortlessly configure the logger to optimize memory usage to the application at hand.
Compact design allowing monitoring of voltage almost anywhere. Select the sampling rate, start time, and high/low alarm settings with an easy to install Windows®-based application.
Measures power, energy and power quality data on all 3 phases including harmonics, transients, sags/swells, power factor, inrush. Does not include current probes.
Autoranging insulation measurements to 10MΩ plus manual datalogging.
Compact, battery operated datalogging appliance tester for analyzing AC/DC power loads.
Compact, battery operated datalogging appliance tester for analyzing AC/DC power loads. Includes NIST Traceable Calibration.
Logs up to 30,000 sets of measurements. Measures single phase, 3-phase/3-wire or 3-phase/4-wire systems.
Datalogs up to 30,000 sets of measurements. Features a large dot-matrix, sun-readable, numerical, backlit LCD with easy-to-use onscreen menu.