Model: PRO 5000 | Order No: TED PRO 5000A KIT
This TED Pro Commercial package is designed for a three phase commercial breaker panel up to 5000 amps.
Designed for a three phase commercial breaker panel up to 5,000 Amps. Additional MTU/CT sets can be added for measuring additional panels.
This TED Pro package is designed for commercial breaker panels up to 5,000A and includes three 5,000 Amp 36" Flexible CTs (Rogowski Coils). The TED Pro energy monitoring control system is a state of the art system for use in any commercial and small industrial complex. The system allows the user to monitor energy usage in real time, thereby managing energy use through awareness of energy use and costs. Energy use and alerts can be presented on a custom display, computer, over the internet, on mobile devices, or by text or email notifications.
Coloured LEDs alert the user to rate-tier changes, high demand, cost or other user defined parameters. There are no additional costs for software, which comes embedded in the system.
|Measuring Transmitting Unit|
|Types of Services||All single or 3-phase|
|3-phase 4W Wye|
|3-phase 3W Delta|
|3-phase 4W Hi-Leg Delta|
|Maximum voltage - Phase/Phase||600V|
|Maximum voltage - Phase/Neutral||347V|
|Maximum Current - per Phase||5000A - *Note 1A|
|Maximum wire size||500 MCM (23mm OD)|
|Voltage Measurement||Voltage Divider Circuit|
|Current Measurement||400A:3V Split-Core CTs|
|Operating Temperature||-40°C < TA < +50°C|
|Energy Measurement & Calculations||Analog Devices ADE7854ACPZ|
|Overall Accuracy||Better than ± 2%|
|Measure and Transmit Energy||± 1W|
|Measure and Transmit Demand||± 1VA|
|Measure and Transmit Voltage||± 0.1V|
|Measure and Transmit Phase Currents||± 1A|
|Measure and Transmit Power Factor||± 0.1%|
|PLC System||Yitran IT700 System|
|Works w/3-phase & Single-phase MTU||Yes|
|Maximum Voltage Phase/Neutral||277V|
|Minimum Voltage Phase/Neutral||95V|
|Cord Types Available||UL/EU/UK/AU|
|Operating Temperature||+5°C < TA <+40°C|
|Communication Methods Available||PLC, Ethernet, Wifi, ZigBee, USB|
|USB 2.0 Port||1|
|USNAP 2.0 Port||2|
|Compatible w/ ZigBee SE 2.0 Smart Meter||Yes|
|Accept Demand Reduction Request from utility||Yes|
|Maximum number of MTUs on one system||4|
|Maximum Spyders on one MTU||2 (8-circuits w/each Spyder)|
|Maximum number of loads measured||36|
|Link status LED||Green/Yellow|
|Energy Use Meter||Green/Yellow/Red|
|TED Footprints - Historical, Graphical, Profiling, TED Advisor, TED Commander||Included|
|System and Utility Setup||Wizard Setup|
|Display System Load||Yes|
|Display System Generation||Yes|
|Display Net Usage||Yes|
|Data Display Options|
|Computer - TED Footprints™ Software||Yes|
|Desktop LCD Display||Yes|
|Wireless LCD Display||Yes|
|Mobile Phones or Pads||Yes|
|TED Commander - Aggregates data frommultiple systems||Yes|
|Third party applications||Yes|
|Second Data||Every second for 1 hours|
|Minute Data||Every minute for 48 hours|
|Hour Data||Every hour for 90 days|
|Day Data||Every day for 2 years|
|Month Data||Every month for 24 years|
|Rates downloadable from Internet||Yes|
|Rates can be pre-programmed||Yes|
|Number of TOU Rates||4|
|Number of Tier/Step Rates||4|
|Critical Peak Rates||Yes|
|Holiday Rates (Canada or USA)||Yes|
|Seasonal Rates (4 seasons)||Yes|
|Tier/Step Rates within Seasons||Yes|
|TOU Rates within Seasons||Yes|
|Demand Charges or Demand Penalties||Yes|
|Update Time||1 second|
|Wireless Display with Backlight/Battery||Yes|
|Smart Thermostats||Wifi or ZigBee|
|USNAP Modules||Wifi or ZigBee|
|USB Dongle||Wifi or ZigBee|
|Load Shedding Devices 20A 1P||Wifi Avail 3rd Qtr|
|Load Shedding Devices 40A 2P||Wifi Avail 3rd Qtr|
1A. Will measure up to 5000A with three 400A parallel feeds using additional CT sets. For systems over 1200A please contact TED Customer Service.
TED's three phase electricity monitoring system works with a building's existing electrical system to collect, analyze, & store electricity data in five simple steps:
Electricity travels from the utility to the building's meter, where the utility measures the amount of electricity usage. Electricity then flows into the building's breaker panel through three main incoming conductors.
Inside the breaker panel, Current Transformers (CTs) are clamped around the main incoming wires to accurately measure the amount of electricity the building is using. The CTs are sensitive to one watt with a +/- 1% accuracy.
Inside the breaker panel, the CTs are connected to a Measuring Transmitting Unit (MTU). The MTU sends the data via Powerline Carrier Communication (which travels over the existing power line) or, if desired, by using an Ethernet connection.
An Energy Control Center (ECC) is the data-receiving hub that analyzes and stores real time electricity data. The ECC is embedded with Footprints data-logging software, and connects to any computer or router via Ethernet. The ECC can also be equipped with a ZigBee USNAP card to communicate with an optional wireless display.
Embedded in the ECC is TED's interactive Footprints software, which can be viewed on a computer (locally or remotely), smart phone, wireless display (via ZigBee), or any other Internet-enabled device. TED's comprehensive data provides instant electrical data in both dollar and kWh amounts, allowing business owners/managers determine how to lower their electricity bill.
TED Pro is an ideal tool for any business owner/manager wanting to save money by tracking and reducing electricity usage. TED Pro Commercial has been installed in restaurants, churches, schools, dorms, apartments, gas stations, convenience stores, marinas, government and military buildings, and strip malls, resulting in a significant decrease in electricity usage (8-15%).
All TED Pro packages come with interactive Footprints Software which provides real-time readings, estimated bills, voltage readings, current rate structures and more helpful information.View a Live Demo Here