PSL PQube 3 Power Analyzer with Pole-Mount, Modem Mounting Kit and GPS receiver
Downloads:
datasheet manual



PSL PQube 3 Power Analyzer with Pole-Mount, Modem Mounting Kit and GPS receiver

Model: PQ3iaB-Rugged-Wall-M24-GPS1-00

This wall-mounted Power Analyzer is housed within a rugged, IP44 rated, non-corrosive, polycarbonate enclosure and comes with a hinged window for viewing, or access, to the PQube 3's touchscreen display. Includes a modem mounting kit for your cell modem and an integrated ultra-precise isolated GPS receiver.

Call for Pricing

Need a quote?

PSL PQ3iaB-Rugged-Wall-M24-GPS1-00 Offers

Ideal for monitoring distribution lines. The enclosure is IP44 rated, vented for temperature reduction, and made from non-corrosive polycarbonate. The cellular modem ready option is perfect for data collection where Ethernet connectivity is unavailable. The ultra-precise GPS features a plug-in, high-accuracy MS1 time synchronization module, and an isolated GPS1 receiver mounted on the enclosure. Power can be drawn from the monitored line, or from a separate instrument power line.

PQ3iaB-Rugged-Wall-M24-GPS1-00 Features

  • Integrated ultra-precise isolated GPS receiver
  • PQube 3 Power Analyzer, pre-packaged in an IP44 rated rugged polycarbonate indoor/outdoor wall-mount enclosure
  • Modem mounting kit for your cell modem, Compatible modems: Landcell 882, Airlink Raven XE, Airlink GX, MultiModem rCell
  • Hinged window permits safe touch screen display access - for configuration and real-time meter viewing
  • Quick connect terminal blocks for easy field wiring
  • Wide measurement voltage range - 100~480Vac
  • Eight current channels - 333mV or ±10V peak
  • Relay output, 4 analog and digital inputs
  • PQube 3 powered from measured voltage, and comes with 1-hour battery backup
  • Just drill holes for your conduit or cable glands, connect wiring, and you’re ready to go
  • Support for extended capacity battery module (UPS2 module)
  • Now with 95% of features of the PQube Classic
    • Option to extend event RMS recording to 16s (RMS 1 cycle window sliding every cycle)
    • Option to use the entire event recording buffer at the start of the event, as an alternate to using half of the buffer for the beginning of the event and half for the end of the event
    • Hide IP address on web pages
  • Nominal frequency 16.67Hz (railways), 400Hz (aviation), or no mains voltage connected (fixed sampling frequency)
  • DC voltage can be connected to the mains inputs (0VDC‐1000VDC) (fixed sampling frequency)
  • Dual voltage /upstream/downstream – improved graph presentations
  • Unsent emails are sent after PQube is restarted (e.g.when PQube3 is shuts down while events email are processed or in queue).
  • Secure - comes with padlockable door clasps
  • No software required!

MS1-GPS1-Ultra-Precise Features

  • The most precise time-stamps available – better than one microsecond for micro-PMU, and better than Class A (by a factor of 10!) for power quality
  • Safest, most noise-free GPS receiver available – PSL-patent-pending full electrical isolation
  • Capture more satellites! Signal-loss-free cable. Receiver/antenna together, in a single ultra-high- sensitivity module!
  • Fully digital cable (not ordinary co-ax) – simple, easy installation with inexpensive CAT5 ethernet fittings
  • Perfectly synchronized time-stamps from PQube 3's that are far apart from each other
  • Converts your PQube 3 into a convenient NTP server, too! – time sync for other PQube 3's, and your other devices…
  • 30-minute internal battery backup for PQube 3
  • Roof-mount, window-mount, or pole-mount bracket

Applications

Industrial and commercial power-grid monitoring

PSL PQ3iaB-Rugged-Wall-M24-GPS1-00 Specifications

Operating Temperature Range -20°C ~ +50°C
Humidity Range 5%~ 90%RH
Protection Rating IP44
Field Wire Gauge Low Voltage Inputs/Relay Outputs/Current Inputs: 26-12 AWG (0.14-2.5mm²)
Voltage Inputs/Instrument Power Inputs: 24-10AWG (0.2-4mm²)
Voltage Input Range 100~480Vac
Current Input Range 333mV or +/- 10V peak (through split-core CT's or flexible CT's)
UPS Backup 5 minutes to 1 hour - user configurable
Weight 12 lbs (5.5 kg)
Material Polycarbonate with stainless steel claps
Click here for complete specifications on the PSL PQ3iaB-Rugged-Wall-M24-GPS1-00

What's included with PSL PQ3iaB-Rugged-Wall-M24-GPS1-00

  • PSL PQube 3 Power Analyzer
  • Integrated ultra-precise isolated GPS1 receiver
  • IP44 rated rugged polycarbonate indoor/outdoor wall-mount enclosure (Pre-packaged)
  • Internal modem mounting plate, mount 2 indoor/outdoor antennas on the enclosure, internal antenna and Ethernet cables, and 24Vdc for the modem

Ask a question about the PSL PQube 3 Power Analyzer with Pole-Mount, Modem Mounting Kit and GPS receiver:

comments powered by Disqus

Review the PSL PQube 3 Power Analyzer with Pole-Mount, Modem Mounting Kit and GPS receiver

" data-description="This wall-mounted Power Analyzer is housed within a rugged, IP44 rated, non-corrosive, polycarbonate enclosure and comes with a hinged window for viewing, or access, to the PQube 3's touchscreen display. Includes a modem mounting kit for your cell modem and an integrated ultra-precise isolated GPS receiver.">