RoCoil TCA-5. For use with DENT RoCoil CTs. Includes High Voltage (200/500V AC) power supply for use on 3-phase services, wiring harness, and TS35/7 DIN rail. Does not include RoCoil CTs.
The RoCoil TCA-5 is a three-channel integrating transconductance amplifier (TCA) that converts the 131mV/1000A electrical output signal from the RoCoil current sensor to a 5 amp AC current, emulating a traditional current sensing transformer.
The RoCoil TCA-5 is factory-calibrated to work with DENT RoCoil CTs (131mV/1000A). The unit can be DIN or panel mounted and a 10" section of TS35/7 DIN rail is included with the kit.
|Input Measurement Voltage||0-655 mV (RMS)|
|0.5-5000 Amps (80 dB Signal Range)|
|Output Current||0-5.00 Amps (RMS)|
|RoCoil Sensing Ranges||500, 1K, 2.5K, 5K Amp (Select)|
|Maximum Burden||1.75 VA per channel|
|Maximum Output Impedance||70 m-ohms|
|Measurement Channels||3 (3-phase or single-phase)*|
|Frequency||50/60 Hz Select|
|Channel Cross Talk||< 60 dB|
|Maximum Operating Temperature||60 °C (140 °F)|
|Current Range Setting|
|Min Current @ 1% Error||Max Current|
|500 A||5 A||500 A|
|1000 A||10 A||1000 A|
|2500 A||25 A||2500 A|
|5000 A||50 A||5000 A|
|TCA Supply Voltage||48 VDC +/- 10%, 30 Watts|
|TCA Supply Current||0.6 Amps DC @ 48 VDC|
|AC/DC Power Supply, 48 VDC||High Voltage: 200/500 VAC|
|Mounting Rail||TS35/7 DIN Rail|
|Width-Base Unit||15.7 cm (6.2")|
|Width-As Assembly||25.0 cm (9.8")|
|Height-Base Unit||9.0 cm (3.5")|
|Height-As Assembly||12.6 cm (5.0")|
|Mounting||TS35/7 DIN Rail or Panel|
|Input Wire Connection||18-28 AWG|
|Output Wire Connection||12-18 AWG (length dependent)|
|*Only 4.5 Amps are available on single-phase loads if all three channels are on the same phase.
**All accuracies specified at 20°C (±2°C) with RoCoil™ centered on conductor.
48 VDC High Voltage (200/500 VAC) power supply for use on 3-phase services, wiring harness, and TS35/7 DIN rail. Does not include RoCoil CTs.
Click on a category to view a selection of compatible accessories with the Dent RoCoil TCA-5 High Voltage Kit.