The PEL 105 is built into a IP67 rated, waterproof case. It is designed for outdoor use and is perfect for pole mounting. Ideal for electricians, engineers and contractors doing work in the areas of building and system monitoring and upgrades, including compliance to article 220.87 of the NEC, as well as overall energy audits and monitoring incoming power. The available Android™ App can be used to configure, view and capture data wirelessly. Wi-Fi and Bluetooth wireless communication provides the operator with the ability to work from a safe distance away from dangerous voltages and currents without the need to wear PPE gear.
|Sampling Frequency||128 samples per cycle; 50/60Hz (16 samples / cycle 400Hz)|
|Data Storage Rate||1 per second and 200ms|
|Storage Capacity||SD card included / SD cards up to 32 GB formatted FAT32 are supported|
|Voltage Inputs||5 input channels via 4mm safety banana jacks|
|Current Inputs||4 input channels via custom 4 pin jacks that accept AEMC® probes & sensors|
|Communication Ports||USB 2.0, Ethernet (RJ45), Wireless Bluetooth Class 1 **, Wi-Fi|
|Power supply||Battery: 6 x AA 1.5 V Alkaline battery (LR6)
AC power supply: AC100 V to AC 240 V, 50 Hz to 60 Hz, 7 VAmax.
** Computers with Class II Bluetooth Class II Bluetooth radio adapter.Click here for complete specifications on the AEMC PEL 105
Click on a category to view a selection of compatible accessories with the AEMC PEL 105 Power and Energy Logger.