AEMC MN373 AC Current Probe, Lead, 100mV/A, 2.4A
Downloads:
datasheet manual



AEMC MN373 AC Current Probe, Lead, 100mV/A, 2.4A

Model: MN373 | Order No: 2116.28

This small and compact Current Probe is designed to meet the most stringent demands in industry and electrical contracting. Model MN373 meets EN 61010, 600V, Cat. III safety standards and is CE Marked and UL approved for Canada and United States. Features a measurement range of 0.01 to 150A.

$199.00 USD

1 Week

Add In House NIST Traceable Calibration to your MN373

Clear selected options


AEMC MN373 Offers

The MN373 is a dual range current probe designed to measure low current (to 200A) with high accuracy and phase shift. The MN373 has an integral 5 ft (1.5m) lead terminated by shrouded banana plugs.

Features

  • Small, compact size
  • Measurement range of 0.01 to 150A
  • Large jaw opening accommodates conductors up to 250MCM
  • Designed for DMMs, loggers, recorders and oscilloscopes
  • 40Hz to 10kHz response
  • 1000mV/A AC – 10mV/A AC output signals
  • Designed to EN 61010, 600V, Cat. III safety standard
  • UL approved for Canada and United States
  • Double Insulation
  • CE Mark

Applications

  • Measuring in breaker panels
  • Industrial loads
  • HVAC
  • Residential and commercial sites
  • 5A secondary current transformers (CTs) monitoring

AEMC MN373 Specifications

Nominal Range 2A & 150A
Measurement Range 0.1 to 150A
Transformation Ratio Voltage output
Output Signal 2A: 1000mV/A; 150A: 10mV/A
Accuracy (2A Range) 0.01 to 0.1A: 5% of Reading ± 2mV
0.1 to 1A: 3% of Reading ± 1mV
1 to 2.4A: 1% of Reading
Phase Shift (2A Range) Not Specified
Overload (2A Range) 2.4A for 10 min ON & 30 min OFF
Accuracy (150A Range) 0.1 to 1A: 3% of Reading ± 200µV
1 to 20A: 2% of Reading ± 200µV
20 to 80A: 1% of Reading
80 to 150A: 3% of Reading
150 to 200A: Not Specified
Phase Shift (150A Range) 0.1 to 1A: Not Specified
1 to 20A: ≤3°
20 to 80A: ≤2°
80 to 150A: ≤3°
150 to 200A: ≤4°
Overload 240A for 10 min ON, 30 min OFF
Frequency Range 40 to 10kHz
Limit Operating 200A permanently to 1kH
Derating above 3kHz: 200A x (1/0.333F), F in kHz to 1kHz
Crest Factor 2A: 3 at 2A Peak with an error (due to CF) of 3%
150A: 3 at 150A Peak with an error (due to CF) of 3%
Working/Common Mode Voltage 600Vrms
Output Termination 5ft Lead
Click here for complete specifications on the AEMC MN373

Ask a question about the AEMC MN373 AC Current Probe, Lead, 100mV/A, 2.4A:

comments powered by Disqus

Review the AEMC MN373 AC Current Probe, Lead, 100mV/A, 2.4A

" data-description="This small and compact Current Probe is designed to meet the most stringent demands in industry and electrical contracting. Model MN373 meets EN 61010, 600V, Cat. III safety standards and is CE Marked and UL approved for Canada and United States. Features a measurement range of 0.01 to 150A.">
NULL