The Simple Logger® II Model L264 is a 4-channel AC/DC voltage recording device powered by alkaline batteries. Voltage inputs are directly measured up to 600VAC or DC. Harmonic measurements are calculated from 64 samples taken on each AC cycle measured and are only available in real-time from the Simple Logger® II Control Panel in the DataView® software.
The Simple Logger® II, Model L264, stores TRMS measurements at user programmable rates from eight times per second to one per day. TRMS calculations are performed on a single line cycle. The main advantage of the logger is its ability to perform a variety of recording tasks with easy and intuitive setup from a computer using DataView® software.
Bluetooth communication provides for the transfer of data from the instrument's internal memory to the computer for monitoring, storing and/or analysis.
|Input Connection||Five recessed 4mm banana jacks|
|Input Range||0 to 600V AC/DC|
|Accuracy (50/60Hz)||0 to 5V unspecified
5 to 50V: ±(0.5% of Reading + 1V)
50 to 600V: ±(0.5% of Reading + 0.5V)
|Sample Rate||64 samples/cycle|
|Storage Rate||Programmable from 125ms to 1 per day|
|Storage Modes||Start/Stop, FIFO, Extended Recording Mode (XRM™) and Store on Alarm|
|Recording Length||15 minutes to 8 weeks, programmable using DataView®|
|Memory||1,000,000 measurements (2MB)
Data is stored in non-volatile memory and retained if the battery is low or removed
|Communication||Bluetooth (Class 2)|
|Power Source||4 x 1.5V C-cell Alkaline batteries (included)|
|Battery Life||Up to 180 days (dependent on storage rate/recording length)|
Click on a category to view a selection of compatible accessories with the AEMC L264 Simple Logger II Bluetooth Datalogger, 4-Channel, 600V AC/DC.