AEMC 300-24-2-10 Flexible Current Probe, 30/300A, 24"
Downloads:
datasheet manual



AEMC 300-24-2-10 Flexible Current Probe, 30/300A, 24"

Model: 300-24-2-10 | Order No: 2112.88

Flexible AC current probe composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes cannot be used.

$369.00 USD

2 to 3 Weeks

Add In House NIST Traceable Calibration to your 300-24-2-10

Clear selected options


AEMC 300-24-2-10 Offers

Composed of an electronic module and flexible sensor, which permits measurements on conductors where standard clamp-on probes cannot be used. The flexibility makes it easy for the sensor to be installed in tight spaces, around cable bundles, around wide or large bus bars, or even wrapped around irregular shapes. The Shape Memory feature enables the user to pre-shape the sensor before inserting it between or around conductors. This feature facilitates positioning the sensor around the conductor, enhances user safety, and alleviates the drooping effect associated with other flexible sensors.

Features

  • Models ranging from 30Arms to 30,000Arms
  • Accuracy 1% of Reading
  • TRMS measurements when connected to a TRMS instrument
  • No core saturation or damage if overloaded
  • Overrange LED for measurement circuitry
  • EN 61010, 1000V Cat. III, CE Mark
  • Waterproof sensor
  • 9V battery, provides typical 150 hr continuous operation
  • Shape Memory for custom pre-shaping of sensor before use (no drooping)
  • Very high frequency response
  • Low phase shift for power measurements
  • Insensitive to DC, measures only AC component on DC + AC signals
  • Excellent linearity
  • Lightweight

Applications

  • Measuring wide bus bars
  • Measuring crowded circuit breaker panels
  • Measuring around large cable bundles
  • Measuring in any traditional application
  • Measuring around irregular shapes

AEMC 300-24-2-10 Specifications

Electrical Specifications
Measurement Range 5 to 300A
Output Signal 100mV/A & 10mV/A
Accuracy 1% of Reading
Crest Factor 3
Phase Shift @ 50/60Hz 1.3°
Frequency Range 10 to 20,000Hz (intentionally limited for optimum performance)
Residual Noise 500mA
Working Voltage 1000Vrms max.
Influence of Frequency Add 1% to the reference
Influence of Adjacent Conductor <2%
Influence of Conductor Position in Jaw <4%
Mechanical Specifications
Output Two 4mm safety banana jacks, standard 3/4" (19mm) spacing
Battery 9V Alkaline
Low Battery Green LED Off when battery reaches 7V
Overload Indication Red LED indicates input greater than selected range
Battery Life 150 hours typical (continuous use)
Sensor Dimensions 24"
Electronic Module Dimensions 4.9 x 2.5 x 1.1" (124 x 64 x 28mm)
Cable Length 6.5ft (2m)
Drop Test 1.0m on 38mm of oak or concrete
Test according to IEC1010
Vibration Test per IEC 68-2-6
Frequency Range: 10Hz to 55Hz
Amplitude: 0.15mm
Mechanical Shock 100G, Test per IEC 68-2-32
Environmental Specification
Case Protection Sensor: IP65 per IEC529; Electronic Module: IP40
Operating Temperature 14 to 131°F (-10 to 55°C)
Storage Temperature -40 to 158°F (40 to 70°C)
Influence of Temperature Sensor: -10°C to 100°C: <0.5% per 10°C
Module: -10°C to 55°C: <0.5% per 10°C
Operative Relative Humidity 10 to 30°C 85 ±5% RH without condensation
40 to 50°C 45 ±5% RH (without condensation)
Altitude Operating: 0 to 2000m; non-operating: 0 to 12000m
Safety Reference Specifications
Safety Ratings EN 61010, 1000V, Cat. III, Pollution Degree 2
Agency Approvals CE Mark
Click here for complete specifications on the AEMC 300-24-2-10

What's included with the AEMC 300-24-2-10

  • 300-24-2-10 Flexible Current Probe
  • Electronic module
  • 9V Battery
  • Manual

Ask a question about the AEMC 300-24-2-10 Flexible Current Probe, 30/300A, 24":

comments powered by Disqus

Review the AEMC 300-24-2-10 Flexible Current Probe, 30/300A, 24"

" data-description="Flexible AC current probe composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes cannot be used.">
NULL