AEMC Single Phase Power Quality Analyzer with MA193-10-BK CT (1000A)
datasheet manual

AEMC Single Phase Power Quality Analyzer with MA193-10-BK CT (1000A)

Model: 8220 w/MA193-10-BK | Order No: 2130.97

Power Quality Meter Model 8220 with MA193-10-BK (1000A).

Sorry! This product has been discontinued.

The AEMC Single Phase Power Quality Analyzer with MA193-10-BK CT (1000A) has been discontinued, and does not currently have a replacement. If you would like a recommendation please call us at 1.877.766.5412

AEMC 8220 Offers

AEMC 8220 Single Phase Power Analyzer is a measurement tool for electrical parameters and distribution network disturbances, enabling the user to obtain instant measurements of the main characteristics of a single-phase network (voltage, current, power, voltage and current harmonics, etc.) and to monitor machinery in operation (temperature, inrush current and duration of operation, distance of windings and rotational speed).

It is capable of AC/DC measurements and features an electroluminescent backlit digital display and is rated to 600V Cat III.

The accuracy is better than 1% (excluding current sensors). It has a great flexibility due to AEMC's range of current sensors, measuring from a few hundred milliamps to several thousand amps. See the available kits below that include current transformers.

This Single Phase Power Analyzer is designed for technicians, control and maintenance engineers, as well as electrical contractors and educators.


  • Measures up to 660Vrms or VDC
  • Measures up to 6500AAC or 1400ADC (probe dependent)
  • Displays Min, Max and Avg Volts and Amps, Crest Factor, Peak and K-Factor
  • Calculates and displays Watts, VARs and VA, Power Factor and Displacement Power Factor for single-phase and balanced three-phase
  • Displays THD for voltage and current
  • Displays individual harmonic values for Volts and Amps through the 50th harmonic
  • Captures and displays inrush current phase rotation and RPM
  • Displays temperature in °F or °C
  • Displays resistance up to 2000Ω and conducts continuity and diode tests
  • Stores up to nine complete sets of readings for all volt, amp, power, harmonics and other measurements
  • Configurable fromDataView® software or front panel
  • Includes DataView® software free for data download and storage, real-time waveform display, analysis and report generation


  • Measurement and recording of power system quality (kW, VA, VAR)
  • Energy metering (kVAh, VARh, kWh)
  • Motor start-up analysis
  • Measure RPM
  • Determine phase rotation
  • Detect hot spots (temperature) in wiring and equipment
  • Verification of power distribution circuits
  • In plant troubleshooting of power distribution panels and individual machinery

8220 Specifications

Voltage (TRMS) Phase-to-Phase: 660V
Phase-to-Neutral: 600V
Current (TRMS) MN Clamp: 5mA to 100mA/120A or 2 to 240A
MR Clamp: 10 to 1000A AC, 10 to 1400A DC
SR Clamp: 3 to 1200A
AmpFlex®: 10 to 6500A
Frequency (Hz) 40 to 70Hz
Other Measurements kW, kVAR, PF, DPF, VA, Phase Rotation Temperature, RPM, Resistance, Continuity, and Diode Test
Harmonics 1st to 50th
Sampling Frequency 256 Samples/Cycle
Data Storage Stores nine sets of readings for Volts, Amps, Power, and Harmonics
Power Source Six NiMH AA rechargeable battery pack or six 1.5V AA Alkaline batteries
AC Supply: 120/230V AC (50/60Hz)
Battery Life ≥8 hours with display on ≥40 hours with display off (recording mode)
Communication Port Optically isolated USB
Display Three-line backlit digital with custom icons
Dimensions 8.3 x 4.3 x 2.4 in (211 x 108 x 60 mm)
Weight 1.9 lbs (0.88kg)
Safety Rating EN 61010, 600V Cat. III, IP 54, Pollution Degree 2
Click here for complete specifications on the AEMC 8220 w/MA193-10-BK

Ask a question about the AEMC Single Phase Power Quality Analyzer with MA193-10-BK CT (1000A):

comments powered by Disqus

Review the AEMC Instruments 8220 w/MA193-10-BK

" data-description="Power Quality Meter Model 8220 with MA193-10-BK (1000A).">