Fluke I20/200A-CLAMP-PQ4 4-phase 20A/200A Mini Clamp-On Current Probes
Downloads:
datasheet



Fluke I20/200A-CLAMP-PQ4 4-phase 20A/200A Mini Clamp-On Current Probes

Model: I20/200A-CLAMP-PQ4

Set of 4x 20/200A switchable mini current clamps for Fluke 1735.

$899.99 USD

2 to 3 Weeks



Fluke I20/200A-CLAMP-PQ4 Specifications

Nominal Current 20 / 200 A ac rms
Overload Up to 260 A ac rms
Maximum Non-Destructive Current 300 A ac rms
Conductor Position Influence < 0.5% of range at 50/60 Hz
Error Due to Adjacent Conductor ≤ 15 mA/A at 50 Hz
Phase Shift at 2 kHz at 200 A < ±1 degree
Frequency Range 40 Hz to 5 kHz (-3 dB)
Temperature Coefficient 0.015 % of range/°C
Measuring range 5 to 95 %RH
Working Voltage ±3 %RH
Accuracy at 50Hz 0.5 to 10A: ±2.5%
10 to 50A: ±1.5%, <2° phase shift
50 to 100A: ±0.5%, <0.5° phase shift
100 to 200A: ±0.5%, <1° phase shift
Maximum Conductor Size 15 mm diameter, bus bar 15 mm x 17mm
Cable Length 2m
Safety Standards 600 V CAT III, pollution degree 2
IEC/EN61010-1: 2001
IEC/EN61010-2-032:2002
IEC/EN61010-031:2002
EMC Standards IEC/EN 61326-1:2006
Click here for complete specifications on the Fluke I20/200A-CLAMP-PQ4

Ask a question about the Fluke I20/200A-CLAMP-PQ4 4-phase 20A/200A Mini Clamp-On Current Probes:

comments powered by Disqus

Review the Fluke I20/200A-CLAMP-PQ4 4-phase 20A/200A Mini Clamp-On Current Probes

" data-description="Set of 4x 20/200A switchable mini current clamps for Fluke 1735.">