Dent CT-HSC-050-U Current Transformer
Downloads:
datasheet



Dent CT-HSC-050-U Current Transformer

Model: CT-HSC-050-U

High Accuracy Split Core Current Transformer. 50A.

$25.00 USD

10+ in Stock


DENT Instruments CT-HSC-050-U Offers

The hinged "Mini" CTs are small, low-cost current transformers with high accuracy (<0.5%) overa wide dynamic range with excellent phase shift. The Minis are ideal where space is limited, such as when metering multiple loads within a panel board. Use for current measurement, energy metering, load surveys, demand metering, energy research, and submetering applications.

Key Features

  • Available in 20A and 50A ranges
  • Excellent phase and ratio error across the full range
  • Accurate down to 0.25A AC
  • Millivolt output

DENT Instruments CT-HSC-050-U Offers

Key Specifications
  Window Size 0.4” (10 mm) 
  Current Range*0.25 ‐ 80A AC 
  Output 333 mV @ 50 A AC 6.66 mV/A AC 
  Rao Error** <0.5% from 0.25 to 80A AC (typical) 
 Phase Error <1.5°  from 1  to 80A AC
<2°  From  0.25 to 1A AC 
Electrical
Output333 mV @ 50 A
Wire PolarityWhite = Hi, posive (+) Black = Low, negave (‐)
Phasing OrientaonArrow On Case Points  Toward Load 
Frequency Range50 to 400 Hz
Mechanical
Case MaterialWhite Nylon, UL 94 V‐0
Leads2.4 M (8’), 600V, 20 gage
Working Temperature-15 to 60°C  (5 to 140°F)
Safety
Working Voltage600 VAC, Category III 
Dielectric Strength3520 VAC  for 1 minute
CertificationConforms to: UL STD 61010‐1  Cerfied to: CAN/CSA STD C22.2  No. 61010‐1
Click here for complete specifications on the Dent CT-HSC-050-U

Ask a question about the Dent CT-HSC-050-U Current Transformer:

comments powered by Disqus

Review the Dent CT-HSC-050-U Current Transformer

" data-description="High Accuracy Split Core Current Transformer. 50A.">