Want a great deal on this AEMC L111 Datalogger?
Are you ready to buy this product but need a better price? No problem - you decide the price! Tell us how much you are willing to pay for this product and we'll try to make it work.
In order to prevent spam through the form, please enter the passcode word displayed below. If you
cannot read the word clearly, you can
change the passcode image
The AEMC L111 Simple Logger is a one channel recording device powered by an alkaline battery pack. Line tracking is performed such that 64 samples over one line cycle are taken. Frequency tracking is performed over the range of ±2Hz around the nominal line frequency (50 or 60Hz). Harmonic measurements are calculated from these 64 samples (Harmonics are only available from the Simple Logger® II Control Panel within DataView®).
Current can be measured and recorded with 0.1A resolution. Full scale measurement is probe dependent. The main advantage of the logger is its ability to perform a variety of recording tasks with easy and intuitive setup from a computer using DataView® software.
Analog information on the input is sampled and converted to a digital signal. This digital signal is processed and stored along with scale and time information. An optically isolated Universal Serial Bus (USB) port provides for the transfer of data from the instrument’s internal memory to the computer for analysis.
Fault current detection Intermittent problem detection Load profiling Neutral current monitoring Harmonic current recording using DataView® software Metering CT resizing Demand recording Compatible standard current probes with current output and banana plug connection 64 samples per cycle Programmable storage rates from 8 every second to 1 every day 3 user selectable storage modes Stores up to 240,000 measurements in non-volatile memory Powered by standard Alkaline batteries Lightweight, compact, fits anywhere 5 LED indicators quickly and clearly display Logger status Includes DataView® software for data storage, real-time waveform display, analysis and report generation Isolated USB communication 50V Cat III
The DataView data logger software configures and control the power
analysis tests of your AEMC data logger from you PC-based computer.
• Display and Analyze Real-Time Data on PC
• Record Real-Time to PC
• Configure all Data Logger
Functions and Parameters
• Display Waveforms, Trend Graphs,
Harmonics (AC Models) and Text Summaries All Real-Time
Custom and Standard Reports and Templates
Requirements: Windows XP /
Windows Vista / Windows 7 (32/64 bit)
256MB of RAM for Windows XP 1GB of RAM for Windows
Vista & Windows 7 (32 bit) 2GB of RAM for Windows Vista
& Windows 7 (64 bit)
80MB of hard disk space (200MB recommended ) CD-ROM
drive Product brochures
No user reviews available.