Brultech EML 2020 Portable Power Meter

The EML2020 portable power meter is the next generation of EML2000 energy monitor for single phase 120V single-phase and 240V split-phase electrical systems.

Perfect for monitoring the power consumption and running cost of individual 120V appliances at the plug outlet on the wall or at the panel.

With two channels, it can be used to measure two 120V appliances at the same time or one 240V split-phase load such as a stove, laundry dryer or air conditioner. Additionally, you can use the EML to measure larger single-phase or split-phase loads with optional 150A or 200A current clamps.

The EML is not capable of monitoring three-phase industrial or commercial loads. However, two single phase up to 200A can be measured with the optional clamps.

The design of the EML yields accurate measurement of not only standard sine-wave type loads, but non-sinusoidal and non-symmetrical current loads as well.

NB: There is optional Windows software for this product.

This product is available as a EML2020H Total Home Energy Monitor designed for monitoring a 200A residential panel within the home or as a portable Energy Auditing Kit with two 200A clamp-on current clamps and a durable waterproof carry case.

What's Included:

• 1 x 60 Amp split core CT
• 1 x Wall transformer (power supply)
  
• User Guide

Optional:

• WPA3 Wall plug adapter
  

Full Review

Modern blue LCD displays:

• Power (Watt)
• Energy (kWh)
• Cost ($---.--)
• Line Voltage (Volt)
• Load Current (Amps)
• Peak Power (Watt)
• Projected Energy Usage (kWh)
• Projected Cost ($----.--)
• Elapsed Monitoring Time
• Watts per Hour

 
Easy selection of:

• Electricity billing “rate” (¢ / kWh)
• Projection period (1 – 255 days)
• Current Sensor type (selectable for each channel)
• Internal Data Logger Storage interval (minutes)

    
Two Channel Design:

• Allows monitoring of two separate 120V loads individually
• Both channels may be used to monitor each phase of a 240V load.

Can be connected to a computer to:

• Download collected Energy Consumption data. (optional software)
• Monitor real time (as it happens) energy use. (optional software)

Power:          1 Watt to 65,000 Watt ( 1 Watt resolution)

Accuracy:     Calibrated to ± 1%, independent of CT accuracy.
                     Typical:  ± 2% with most current sensors.

Energy:         .001 KWh to 16,777 kWh (.001 kWh resolution)

Voltage:        85V to 480V depending on the Potential Transformer utilised.
                    Standard unit:  85V to 130V

Input Current:  0.1A to 400A, dependant on the Current Transformer (CT) utilised.
                       Standard unit:  0.1A to 60A (100A peak)
                       WPA-3 wall plug adaptor for standard plug appliances: 15A.

Elapsed Monitoring Time:  1 sec to 255 days, 23 hrs, 59 min, 59 seconds (one second resolution)

Rate (cost for electricity):   0.1   /kWh to 99.9 ¢/kWh (in 0.1 ¢/kWh resolution)

Displayed Cost of Energy:  0.1  ¢ to $ 12000.00

Projection Period: 1 day to 255 days (typically set to 7days, 30 days, 60days or 90 days)

Data Logger Storage Interval:  From 1 minute to 255 minutes (1 minute increments)    (stored data is the average of thousands of samples over that period)

Data Logger memory:  Standard Unit 13,080 records
                                  Optionally expandable to 52,401 records (in 13,107 increments)

There is optional DL1200 software available for this product. This software is required for downloading and reporting on data saved in the EML meter.

Product brochures

Product manuals

---

---