Home » Dent CON-1000-B Clamp-On Current Transformer 1000A
Dent CON-1000-B Clamp-On Current Transformer 1000A
Clamp-on current transformers are the one-hand operating solution for
temporary or long-term studies. They are designed to work in tight
places and clamp around bus bars.
DENT’s energy monitoring components are used for a variety of applications, including building automation, tenant submetering, performance verification, energy management and new technology assessment.
DENT’s energy monitoring components are used for a variety of applications, including building automation, tenant submetering, performance verification, energy management and new technology assessment.
The Good:
The Bad:
The Bottom Line:
The Bad:
The Bottom Line:
Full Review
- Current ranges include 2.0A to 150A; 10 to 600A; 10.0 to1200A AC
- Output Signal: 333 mV @ Maximum Input
- Working Voltage : 600Vrms
ELECTRICAL SPECIFICATIONS
Nominal Rating: 1000A
Useful Current Range: 10 to 1200A AC
Output Signal: .333 mV/A; 333mV @ 1000A AC
Accuracy: 10A: ≤ 3%; 50A : ≤ 1.5%; 200A: ≤ 0.75%; 1200A: ≤ 0.5%
Phase Shift: 10A: ≤ 3°; 50A : ≤ 1.5°; 200A: ≤ 0.75°; 1000A: ≤0.5°; 1200A: ≤ 0.5°
Frequency Range: 30 Hz to 5 kH
MECHANICAL SPECIFICATIONS
Dimensions: 21.6 x 11.1 x 4.5 cm (8.5 x 4.4 x 1.8”)
Maximum Cable/Bus Bar: Cable Diameter 5.2 cm (2.0”); Bus bar 5.0 x 0.5 cm (1.9” x 0.2”)
Polarity: Red lead is positive
Output Lead: Double insulated cable, 3 m (10 ft )
Operating Temperature: -10° to 50°C (14° to 120°F)
OTHER FEATURES:
Jaw Opening: 5.7 cm (2.25”)
Weight: 500 g (19.2 oz)
Dielectric Strength: 600V Category III, Pollution 2; 5550V, 50/60 Hz between primary, secondary and the outer case of the handle
Storage Temperature: -40° to +70°C (-40° to 160°F )
Case Protection: IP 40 (IEC 529)
Probe Enclosed
Drop Test: Test per IEC 68-2-32: 1.0 m drop on 38 mm of Oak on concrete
Mechanical Shock: 100 g Test per IEC 68-2-27
Common Mode Voltage: 30 Vrms
SAFETY SPECIFICATIONS
Working Voltage: Maximum 600 Vrms
CE Mark: Extra insulation between electrical parts and handle; conforms to IEC
1010-2-032
Nominal Rating: 1000A
Useful Current Range: 10 to 1200A AC
Output Signal: .333 mV/A; 333mV @ 1000A AC
Accuracy: 10A: ≤ 3%; 50A : ≤ 1.5%; 200A: ≤ 0.75%; 1200A: ≤ 0.5%
Phase Shift: 10A: ≤ 3°; 50A : ≤ 1.5°; 200A: ≤ 0.75°; 1000A: ≤0.5°; 1200A: ≤ 0.5°
Frequency Range: 30 Hz to 5 kH
MECHANICAL SPECIFICATIONS
Dimensions: 21.6 x 11.1 x 4.5 cm (8.5 x 4.4 x 1.8”)
Maximum Cable/Bus Bar: Cable Diameter 5.2 cm (2.0”); Bus bar 5.0 x 0.5 cm (1.9” x 0.2”)
Polarity: Red lead is positive
Output Lead: Double insulated cable, 3 m (10 ft )
Operating Temperature: -10° to 50°C (14° to 120°F)
OTHER FEATURES:
Jaw Opening: 5.7 cm (2.25”)
Weight: 500 g (19.2 oz)
Dielectric Strength: 600V Category III, Pollution 2; 5550V, 50/60 Hz between primary, secondary and the outer case of the handle
Storage Temperature: -40° to +70°C (-40° to 160°F )
Case Protection: IP 40 (IEC 529)
Probe Enclosed
Drop Test: Test per IEC 68-2-32: 1.0 m drop on 38 mm of Oak on concrete
Mechanical Shock: 100 g Test per IEC 68-2-27
Common Mode Voltage: 30 Vrms
SAFETY SPECIFICATIONS
Working Voltage: Maximum 600 Vrms
CE Mark: Extra insulation between electrical parts and handle; conforms to IEC
1010-2-032
Product brochures
Technical training
No user reviews available.
