Home » Veris H8163-CB Modbus Communications Card for the H8100 Series
Veris H8163-CB Modbus Communications Card for the H8100 Series
Field installation of the H8163-CB is simple. It works with 2- and 4-wire Modbus networks. Just set the onboard switches for parity, baud rate and wiring, plug the card into the meter, power it up and check the status LEDs to verify connection.
All available Energy Meter data can be transmitted to the host system for recording and analysis.
APPLICATIONS
- Commercial tenant submetering
- Performance contracting
- Cost allocation
- Real-time power monitoring via local display or through control/data acquisition systems
The Bad:
The Bottom Line:
Full Review
- Easily network to existing systems via RS-485 connection
- Field-selectable parity: odd/even/none
- Works with 2-wire and 4-wire systems*
- Field-selectable baud rate: 2400, 4800, 9600, or 19200**
- Measure interval demand & sub-interval demand
|
SPECIFICATIONS |
|
|
Output Type: |
|
|
H8163-CB |
Modbus |
|
H8126-CB |
N2 |
|
H8186-CB |
BACnet |
|
Connection |
2-wire or 4-wire, selectable |
|
Parity |
None/Odd/Even, Selectable |
|
Baud Rate |
2400, 4800, 9600, 19200 baud, selectable* |
|
|
1-63 |
|
Dimensions |
2” (51mm) x 6” (152mm) |
|
Inputs: |
|
|
Demand Reset** |
Starts a new demand interval. Pulled-up to +5V via 4.7k. Contact closure or pull-to-ground. Edge-triggered |
|
Data Output: |
kWh, Consumption |
|
|
kW, Real power kVAR, Reactive power kVA, Apparent power Power factor Voltage, line to line Voltage, line to neutral Amps, Average current kW, Real power ØA kW, Real power ØB kW, Real power ØC Power factor ØA Power factor ØB Power factor ØC Voltage, ØA to ØB Voltage, ØB to ØC Voltage, ØA to ØC Voltage, ØA to Neutral Voltage, ØB to Neutral Voltage, ØC to Neutral Amps, Current ØA Amps, Current ØB Amps, Current ØC |
|
|
Interval kW/kVAR Demand** User Selectable Sub-Interval Demand** |
|
*9600, 19200, 38400
for H8186-CB **Does not apply to
H8186-CB |
|
