Home » Veris H8036 Enercept Enhanced Networked Power Meter
Veris H8036 Enercept Enhanced Networked Power Meter
These innovative meters combine the power metering electronics and high-quality industrial grade CTs in a single package which can be mounted directly inside an electrical panel to substantially reduce installed cost.
In addition, up to 63 H8036 meters can be daisy-chained together on a single RS485 network.
The H8036 is available with a wide range of current sensors from 100A to 2400A, with either 2, 3 or 4 current transformers.
Note: The H8036 measures 26 different electrical, power and energy parameters. If you only require kW and kWh, consider the H8035 Enercept Networked Power Meter.
The Bad:
The Bottom Line:
Full Review
- Monitor electrical, power & energy parameters (kW, kWh, kVAR, PF, Amps, Volts, etc) at up to 63 locations on a single RS-485 network…greatly reduces wiring time and cost
- Fast split-core installation eliminates the need to remove conductors
- Precision metering electronics and current transformers in a single package–reduces the number of installed components– huge labor savings
- Smart electronics eliminate CT orientation concerns–fast trouble-free in stallation
- ±1% total system accuracy, (10% to 100% of CT rating)
|
Input Primary Voltage |
208
to 480VAC rms |
|
Number of Phases Monitored |
One or Three |
|
Frequency |
50/60 Hz |
|
Maximum Primary Current |
Up to 2400 amps cont. per phase |
|
Internal Isolation |
2000VAC rms |
|
Insulation Class |
600VAC rms |
|
|
0 to 60°C, 50°C for 2400A |
|
|
0 - 95% non-con dens ing |
|
Systems Accuracy ±1% of reading from 10% to 100% of
the rated current of the CTs... accomplished by matching the CTs with a meter
and calibrating them as a system |
|
|
Output Physical Characteristics |
RS-485, 2 wire plus shield |
|
Baud Rate |
9600, 8N1 format |
|
Protocol |
Modbus RTU |
|
Current Transformer |
Split-core, 100, 300, 400, 800,
1600, 2400 amps |
H8036 Data Output Specifications
Data output:
|
kWh, Consumption
|
kW, Real Power |
|
kVAR, Reactive power
|
kVA, Apparent power |
|
Power factor
|
Average Real power |
|
Minimum Real power
|
Maximum Real power |
|
Voltage, line to line
|
Voltage, line to neutral |
|
Amps, Average current
|
kW, Real power ØA |
|
kW, Real power ØB
|
kW, Real power ØC |
|
Power factor ØA
|
Power factor ØB |
|
Power factor ØC
|
Voltage, ØA to ØB |
|
Voltage, ØB to ØC
|
Voltage, ØA to ØC |
|
Voltage, ØA to Neutral
|
Voltage, ØB to Neutral |
|
Voltage, ØC to Neutral
|
Amps, Current ØA |
|
Amps, Current ØB
|
Amps, Current ØC |
