Home » Current Transformers » Split Core Current Transformers » Veris H8035 Enercept Networked kW/kWh Meter
Veris H8035 Enercept Networked kW/kWh Meter
Enercept H8035 Series energy meters are Modbus networked power meters used for basic energy services metering/submetering in commercial and industrial applications.
These innovative meters combine the power metering electronics and high-quality industrial grade CTs in a single package which can be mounted directly inside an electrical panel to substantially reduce installed cost.
In addition, up to 63 H8035 meters can be daisy-chained together on a single RS485 network.
The H8035 is available with a wide range of current sensors from 100A to 2400A, with either 2, 3 or 4 current transformers.
NOTE: The H8035 Enercept measures kW and kWh only. For additional power, energy and electrical measurement parameters, check out the H8036 Enercept Power Meter.
Applications
These innovative meters combine the power metering electronics and high-quality industrial grade CTs in a single package which can be mounted directly inside an electrical panel to substantially reduce installed cost.
In addition, up to 63 H8035 meters can be daisy-chained together on a single RS485 network.
The H8035 is available with a wide range of current sensors from 100A to 2400A, with either 2, 3 or 4 current transformers.
NOTE: The H8035 Enercept measures kW and kWh only. For additional power, energy and electrical measurement parameters, check out the H8036 Enercept Power Meter.
Applications
- Energy management & performance contracting
- Submetering for commercial tenants
- Activity based costing in commercial and industrial facilities
- Real-time power monitoring
The Good:
The Bad:
The Bottom Line:
The Bad:
The Bottom Line:
Full Review
The world’s most cost-effective meter
- Monitor power parameters (kW, kWh) at up to 63 locations on a single RS-485 network…greatly reduces wiring time and cost
- Fast split-core installation eliminates the need to remove conductors
- Precision metering electronics and current transformers in a single package–reduces the number of installed components– huge labor savings
- Smart electronics eliminate CT orientation concerns–fast trouble-free in stallation
- ±1% total system accuracy, (10% to 100% of CT rating)
H8035/6 SERIES SPECIFICATIONS
|
Input Primary Voltage |
208
to 480VAC rms |
|
Number of Phases Monitored |
One or Three |
|
Frequency |
50/60 Hz |
|
Maximum Primary Current |
Up to 2400 amps cont. per phase |
|
Internal Isolation |
2000VAC rms |
|
Insulation Class |
600VAC rms |
|
|
0 to 60°C, 50°C for 2400A |
|
|
0 - 95% non-con dens ing |
|
Systems Accuracy ±1% of reading from 10% to 100% of
the rated current of the CTs... accomplished by matching the CTs with a meter
and calibrating them as a system |
|
|
Output Physical Characteristics |
RS-485, 2 wire plus shield |
|
Baud Rate |
9600, 8N1 format |
|
Protocol |
Modbus RTU |
|
Current Transformer |
Split-core, 100, 300, 400, 800,
1600, 2400 amps |
Product brochures
No user reviews available.
