Home » Revenue & Billing Meters » PML ION 6200 Power Meter - Revenue Grade, Three Phase
PML ION 6200 Power Meter - Revenue Grade, Three Phase
An ideal replacement
for multiple analog meters, the PowerLogic ION6200’s modularity allows
genset and electrical equipment manufacturers, panel shops, EMS
manufacturers and energy service providers to reduce inventory
requirements by stocking inexpensive components and building specific
meter configurations as needed, rather than carrying a large inventory
of pre-configured meters.
The PowerLogic® ION6200 meter is an ultra-compact meter that offers outstanding quality, versatility and functionality in a low cost, flexible meter.
Advantages:
The meter is suitable for myriad applications such as substation monitoring, revenue metering/sub-metering and cost allocation and is an excellent fit for both energy providers and energy consumers. It offers an excellent upgrade path, allowing you to start with a low cost base model and add new features and capabilities as requirements evolve. It can be integrated with our ION® EEM enterprise energy management software, ION Enterprise® operations software or other automation or SCADA system.
Key features
The PowerLogic® ION6200 meter is an ultra-compact meter that offers outstanding quality, versatility and functionality in a low cost, flexible meter.
Advantages:
The meter is suitable for myriad applications such as substation monitoring, revenue metering/sub-metering and cost allocation and is an excellent fit for both energy providers and energy consumers. It offers an excellent upgrade path, allowing you to start with a low cost base model and add new features and capabilities as requirements evolve. It can be integrated with our ION® EEM enterprise energy management software, ION Enterprise® operations software or other automation or SCADA system.
Key features
- Multiple form factors - Include integrated models with a built-in display that fit in an ANSI 4” cutout, transducer models without a display that can be fastened to a flat surface, and an optional remote display module.
- Modularity - Enables upgrading the ION6200 to meet future needs, simple retrofit and a low initial investment.
- Revenue certified/accurate parameters - Include 3-phase, 4 quadrant energy & demand and compliance to ANSI C12.20 0.5 standards and includes a Megawatt option that provides readings in megawatts and kilovolts for high voltage applications.
The Good:
The Bad:
The Bottom Line:
The Bad:
The Bottom Line:
Full Review
Modularity
- Simple retrofit
- Low initial investment that can still meet future needs
- Plug-in packs add functionality as required
- Upgrade easily while the meter still installed
Ease of Use
- Fast setup via display or software
- Free configuration software
- Bright, easy to read, 12 digit 3/4" high LED display
Measurements
- 64 samples per cycle
- IEC 60687 class 0.5 accuracy
- 4 Quadrant energy & demand
- Per phase voltage, current, frequency & power factor
- Neutral current, peak current demand, THD
- 49 real-time, true RMS electrical parameters
Communications
- RS-485 port
- Modbus RTU for integration with Energy Management Systems
Pulse Outputs
- kWh and/or kVARh and/or kVAh pulsing
Accuracy
- Voltage: L-N 0.3% reading, L-L 0.5% reading
- Frequency: +/- 0.1Hz
- Current:
- >= 5% of full scale: 0.3% reading
- < 5% of full scale: 0.3% reading + 0.05% full scale
- I4 derivation: 0.6% reading + 0.05% full scale
- Power factor: 1.0% reading
- Total harmonic distortion (THD): +/-1.0% reading
- Power and energy measurements:
- (kW, kVA, kVAR, kWh, kVAh, kVARh). Complies with IEC 60687 Class 0.5 and ANSI 12.20 Class 0.5 (0.5% reading).
- Operating temp: -20°C to 70°C (-4°F to 158°F)
- Storage: -40°C to 85°C (-40°F to 185°F)
- Humidity: 5% to 95% non-condensing
Installation and Input Ratings
- 64 samples per cycle true RMS
- Autoranging voltage inputs allow direct connection to 400/690VAC systems. The meter is calibrated for 60 to 400VAC L-N connections.
- Supports Direct 4-Wire Wye, 3-Wire Wye, 3-Wire Delta, Direct Delta and single phase configurations
- 3-phase voltage and current inputs
- Impedance: 2M Ohm/phase
- Burden: 0.05VA (typical) @ 5A RMS
- 5A nominal / 10A full scale / 20% overrange
- full accuracy
- Standard terminal strip covers
Dimensions and Shipping
- Basic unit installed depth: 4.2 x 4.2 x 1.6 in (106.7 x 106.7 x 40.6 mm)
- Remote display: 4.2 x 4.2 x 0.9 in (106.7 x 106.7 x 22.9 mm)
- Shipping weight: 1.5 lb / 0.68 kg
Product brochures
No user reviews available.
