Fluke i200s AC Current Clamp

Fluke i200s AC Current Clamp

Model: I200S

200A AC current clamp with BNC terminated lead.

$249.99 USD

Availability: 2 in Stock
Add In House NIST Traceable Calibration to your I200S

Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools.

The Fluke i200s AC Current Clamp is a dual range 20A and 200A with voltage output via a safety insulated BNC connector.

A dual banana to BNC adapter is supplied to allow the i200s to be connected to multimeters with banana inputs.

For single range look at the Fluke i200
Nominal current range 20A, 200A
Continuous current range 0.1 A - 24 A, 0.5 A - 200 A
Maximum Non-Destructive Current 240A
Lowest measurable current 0.1A
Basic accuracy 1.5% +0.5 A (48-65 Hz) (% reading + floorspec)
Useable frequency 40 Hz - 10 kHz
Output level(s) 100 mV/A, 10 mV/A

Safety Specifications

CAT III, 600 V
Maximum voltage

600 V AC

Mechanical & General Specifications

1 year
Maximum conductor diameter

20 mm
Maximum conductor size (busbar)

20 x 5 mm
Output cable length

2.0 m
BNC Adapter

BNC to banana adapter included


Ask a question about the Fluke i200s AC Current Clamp:

comments powered by Disqus

Review the Fluke Corporation I200S

" data-description="200A AC current clamp with BNC terminated lead.">