Fluke 434-II Power Quality Analyzer
Downloads:
datasheet manual



Fluke 434-II Power Quality Analyzer

Model: 434-II

Fuke 434-II power quality analyzer kit with 4x i430Flex-TF 6000A thin flexible current probes.

$6,299.99 USD

1 to 2 Weeks

Add In House NIST Traceable Calibration to your 434-II

Clear selected options



Fluke 434-II Offers

The Fluke 434 Series II Power Quality and Energy Analyzer is the world's only Power Quality analyzer that can monetize the cost of energy waste due to poor power quality and is ideal for characterizing power quality, conducting load studies and capturing hard-to-find voltage events over a user-defined period of time. The Fluke 434 II Energy Analyzer is the ideal tool for advanced energy logging and energy monetization, identifying the most energy-wasteful areas of your facility.

Features

  • These power quality and energy analyzers help locate and predict, prevent and troubleshoot power quality problems in three-phase and single-phase power distribution systems
  • Energy Loss Calculator: classic active and reactive power measurements, unbalance and harmonic power, are quantified to pinpoint true system energy losses in dollars
  • Power Inverter Efficiency: Simultaneously measure AC output power and DC input power for power electronics systems using optional DC clamp
  • Troubleshoot Real-time: Analyze trends using cursors and zoom tools
  • Measure all Three Phases and Neutral: With included flexible current probes (4) with enhanced thin flex designed to fit into the tightest places
  • Automatic Trending: Every measurement is always automatically recorded, without any set-up
  • System Monitor: Ten power quality parameters on one screen according to EN61060 power quality standard
  • Logger Function: Configure for any test condition with memory for up to 600 parameters at user defined intervals
  • View Graphs and Generate Reports: With included analysis software
  • Battery Life: Seven hours of operating time per charge on Li-ion battery pack
  • Automatic Transient Mode: Capture 200kHz waveform data on all phases simultaneously up to 6kV
  • Fully Class A Compliant: Conduct tests according to stringent international IEC 61000-4-30 Class A standard
  • Mains Signalling: Measure interference from ripple control signals at specific frequencies

Fluke 434-II Specifications

Voltage Inputs
Number of Inputs 4 (3 phase + neutral) DC-coupled
Maximum Input Voltage 1000V RMS
Nominal Voltage Range Selectable 1V to 1000V
Max. Peak Measurement Voltage 6k V (transient mode only)
Input Impedance 4MΩ//5pF
Bandwidth >10kHz, up to 100kHz for transient mode
Scaling 1:1, 10:1, 100:1, 1,000:1 10,000:1 and variable
Current Inputs
Number of Inputs 4 (3 phase + neutral) DC- or AC-coupled
Type Clamp or current transformer with mV output or i430flex-TF
Range 0.5 Arms to 600 Arms with included i430flex-TF (with sensitivity 10x)
5 Arms to 6000 Arms with included i430flex-TF (with sensitivity 1x)
0.1 mV/A to 1 V/A and custom for use with optional AC or DC clamps
Input Impedance 1MΩ
Bandwidth > 10 kHz
Scaling 1:1, 10:1, 100:1, 1,000:1 10,000:1 and variable
Sampling System
Resolution 16 bit analog to digital converter on 8 channels
Maximum Sampling Speed 200kS/s on each channel simultaneously
RMS Sampling 5000 samples on 10/12 cycles according to IEC61000-4-30
PLL Synchronization 4096 samples on 10/12 cycles according to IEC61000-4-7
Nominal Frequency 50 and 60Hz
Click here for complete specifications on the Fluke 434-II

What's included with the Fluke 434-II

  • 434-II 3-Phase Power Quality Analyzer
  • BC430 Power Adapter
  • International plug adapter set
  • BP290 (Single capacity Li-ion battery) 28 Wh (8 hours or more)
  • TLS430 Test lead and Alligator clip set
  • WC100 color coding clips and regional decals
  • i430flex-TF, 24 inch (61 cm) length, 4 flexible current probes
  • 8 GB Fluke Connect Wireless SD card
  • PowerLog on CD (includes operator manuals in PDF format)
  • USB cable A - Mini B
  • C1740 Soft Case

Accessories

Click on a category to view a selection of compatible accessories with the Fluke 434-II Power Quality Analyzer.

Fluke WC100 multi color wire clips WC100 9135
For use with Fluke 430-Series power quality analyzers.
$39.99 USD

Learn More


Fluke i5sPQ3, 5A AC Current Clamps, 3-pack I5SPQ3 3023
A pack of 3 pieces of the i5s current clamps, specially configured to provide low current accuracy while taking measurements on secondary current transformers.
$1,299.99 USD

Learn More

Fluke i400S AC Current Clamp I400S 1825
400A AC current clamp with BNC terminated lead.
$289.99 USD

Learn More

Fluke HH290 Hanging Hook HH290 9150
Hanging Hook for ScopeMeter 190-Series II.
$89.99 USD

Learn More

Fluke i30s AC/DC Current Clamp I30S 4619
30A AC/DC current clamp with BNC terminated lead.
$624.99 USD

Learn More

Fluke i310s Current Probe I310S 5845
AC/DC Clamp. Features a range of 30A and 300A AC & 45A and 450A DC.
$449.99 USD

Learn More

Fluke i6000s Flex-24 AC Current Probe I6000S-FLEX-24 5937
Flexible 24" 6000A AC current probe with BNC terminated lead.
$699.99 USD

Learn More

Fluke i200s AC Current Clamp I200S 1555
200A AC current clamp with BNC terminated lead.
$249.99 USD

Learn More

Fluke AC285 SureGrip Large Alligator Clip AC285 1403
Large alligator clip for test leads used with Fluke meters.
$24.99 USD

Learn More

Fluke EBC290 External Battery Charger EBC290 8793
External battery charger for BP290-Series Li-ion batteries for Fluke ScopeMeters and power quality analyzers.
$129.99 USD

Learn More

Fluke BP291 Double Capacity Li-Ion Battery Pack BP291 8807
For Fluke 43X power quality analyzers and 190-series ScopeMeters.
$349.99 USD

Learn More

Ask a question about the Fluke 434-II Power Quality Analyzer:

comments powered by Disqus

Review the Fluke 434-II Power Quality Analyzer

" data-description="Fuke 434-II power quality analyzer kit with 4x i430Flex-TF 6000A thin flexible current probes.">