AEMC L564 4-Channel Voltage & Current Datalogger
Downloads:
datasheet manual



AEMC L564 4-Channel Voltage & Current Datalogger

Model: L564 | Order No: 2126.36

4-Channel, True RMS, Bluetooth, Voltage & Current, DataView Software.

$835.00 USD

4 to 5 Weeks

Add In House NIST Traceable Calibration to your L564

Clear selected options


The Simple Logger® II Model L564 is a 4-channel AC voltage and current recording device powered by alkaline batteries. Voltage inputs are directly measured up to 600VAC. Harmonic measurements are calculated from these 64 samples taken on each cycle measured and are only available from the Simple Logger® II Control Panel in the DataView® software.

The Simple Logger® II, Model L564, stores TRMS measurements at user programmable rates from eight times per second to one per day. TRMS calculations are performed on a single line cycle. The main advantage of the logger is its ability to perform a variety of recording tasks with easy and intuitive setup from a computer using DataView® software.

Analog information on the input is sampled and converted to a digital signal. This digital signal is processed and stored along with scale and time information. Bluetooth communication provides for the transfer of data from the instrument's internal memory to the computer for analysis.


Applications

  • Single/split phase and 2 phase load monitoring
  • Neutral and ground voltage/current monitoring
  • Intermittent problem detection
  • Harmonic voltage/current monitoring using DataView® software
  • Residential power monitoring
  • Fault voltage/current detection
  • Load profiling

Specifications

Electrical
Channels Four (two voltage & two current)
Connection Current Channel Voltage Channel
Input Connection Two Three recessed banana jacks
Input Range 0 to 1V ac *(for use with current probes with a voltage output) 0 to 600V ac
Resolution 0.1mV 0.1V
Accuracy (50/60Hz) 0 to 10mV unspecified 10 to 50mV: ±(0.5% of Reading + 1mV) 50 to 1000mV: ±(0.5% of Reading + 0.5mV) 0 to 5V unspecified 5 to 50V: ±(0.5% of Reading + 1V) 50 to 600V: ±(0.5% of Reading + 0.5V)
Input Impedance 100kΩ 16MΩ
Maximum Input Voltage 5Vrms or ± 7.07V peak 1.2 x 600V
Sample Rate 64 samples/cycle
Storage Rate Programmable from 125ms to 1 per day
Storage Modes Stop when full, FIFO, Extended Recording Mode (XRM™) and Store on Alarm
Recording Length 15 minutes to 8 weeks, programmable using DataView®
Memory 1,000,000 measurements (2MB). The recorded data is stored in non-volatile memory and will be retained even if the battery is low or removed.
Communication Bluetooth (Class 2)
Power Source 4 x 1.5V C-cell Alkaline batteries (included)
Battery Life Up to 180 days (dependent on sample rate and recording length)
Mechanical
Dimensions 5.904 x 5.904 x 3.568" (150 x 150 x 91mm) w/o Sensor
Weight (with battery) 2.1 lbs (0.95kg)
Case UL94-VO
Vibration IEC 68-2-6 (1.5mm, 10 to 55Hz)
Shock IEC 68-2-27 (30G)
Drop IEC 68-2-32 (1m)
Environmental
Operating Temperature 14° to 122°F (-10° to 50°C)
Storage Temperature -4° to 140°F (-20° to 60°C)
Relative Humidity Up to 85% @ 95°F (35°C), Non-condensing
Click here for complete specifications on the AEMC L564

Key Features

  • Four input channels (2 voltage & 2 current)
  • Up to 180 days of operation from standard alkaline batteries
  • Stores 1,000,000 measurements
  • Includes FREE DataView® software for data storage, real-time waveform display, analysis & report generation
  • Wireless Bluetooth data communication
  • User programmable recording modes: Start/Stop, FIFO, Extended Recording Mode (XRM) and Alarm Recording
  • Supported current probes: SR193-BK, MN193-BK or MN93-BK
  • Includes set of 3 color-coded (red/black/white) 5 ft leads with color-coded alligator clips
  • 600V CAT IV; 1000V CAT III

Accessories

Click on a category to view a selection of compatible accessories with the AEMC L564 4-Channel Voltage & Current Datalogger.

AEMC MN193-BK Current Transformer for the L104, L564, PowerPad, and PEL Series MN193-BK 3818
For use with AEMC Power Quality Instruments 8220, 8230, and 3945.
$249.00 USD

Learn More

AEMC SR193-BK Current Transformer for the AEMC L104, L564, PowerPad, and PEL Series SR193-BK 3820
This AC Current Probe (1200A) is for use with AEMC Power Quality Instruments 8220, 8230 PowerPad Jr. & 3945 PowerPad.
$299.00 USD

Learn More

AEMC MN93-BK Current Transformer for the L104, L564, PowerPad, and PEL Series MN93-BK 3819
For use with AEMC 8220 Single Phase Power Quality Analyzer, 8230 PowerPad Jr. & 3945 PowerPad.
$185.00 USD

Learn More

Ask a question about the AEMC L564 4-Channel Voltage & Current Datalogger:

comments powered by Disqus

Review the AEMC L564 4-Channel Voltage & Current Datalogger

" data-description="4-Channel, True RMS, Bluetooth, Voltage & Current, DataView Software.">
NULL