Home » Dent SCM-0600-U Medium Split Core Current Transformer 600A w/ 1.25" opening
Dent SCM-0600-U Medium Split Core Current Transformer 600A w/ 1.25" opening
Part Number:
DT SCM-0600-U
In Stock?
Please call for availability.
Quantity
Price:
$73.50 
CAD (change)
CAD (change) 
The low-cost solution for permanent or long-term studies. The split
core design means no de-energizing or wire disconnection required.
Opening “Split-Core” Current Transformer (SCT) provides linear output voltage that is directly proportional to the input current. This current transformer is easily and safely installed over existing electrical power lines without disconnecting the lines
or interrupting service.
DENT’s energy monitoring components are used for a variety of applications including building automation, tenant submetering, performance verification, energy management and new technology assessment.
Opening “Split-Core” Current Transformer (SCT) provides linear output voltage that is directly proportional to the input current. This current transformer is easily and safely installed over existing electrical power lines without disconnecting the lines
or interrupting service.
DENT’s energy monitoring components are used for a variety of applications including building automation, tenant submetering, performance verification, energy management and new technology assessment.
The Good:
The Bad:
The Bottom Line:
The Bad:
The Bottom Line:
Full Review
- Output is 333mV at rated current
- Internal precision burden resistor across secondary
- Leads-8ft. twisted pair
- Epoxy encapsulated housing
- Accuracy is measured from 10% to 130% of rated current
- Shrouded core blades for protection during installation
- Core interleaved at joints for accuracy
- Phase angle is measured at 50% of rated current
- Snap closing/opening feature
- Accuracy = +/- 1%
- Phase shift <2degrees
ELECTRICAL SPECIFICATIONS
Output Signal: 333mV @ rated current
Accuracy: +/- 1% at 10% to 130% of rated current
Phase Shift: <2° at rated current
Frequency Range: 50 Hz to 400 Hz
MECHANICAL SPECIFICATIONS
Dimensions: 8.26 x 8.5 x 2.54 cm; (3.3 x 3.4 x 1.0”)
Polarity: White lead is positive
Output Lead: Leads 2.7 m (8 ft) twisted pair 22 AWG
Operating Temperature: Maximum 105°C (220°F)
OTHER FEATURES
Window Size: 3.18 cm (1.25”)
Weight: 340 g (12 oz)
Dielectric Strength: 5000V around the case; 600V rated leads
Storage Temperature: Maximum 105°C (220°F)
Case Protection: Epoxy encapsulated housing
SAFETY SPECIFICATIONS
ETL Listed: Compliant with IEEE C57.13-1993
Working Voltage: Maximum 600 Vrms
Output Signal: 333mV @ rated current
Accuracy: +/- 1% at 10% to 130% of rated current
Phase Shift: <2° at rated current
Frequency Range: 50 Hz to 400 Hz
MECHANICAL SPECIFICATIONS
Dimensions: 8.26 x 8.5 x 2.54 cm; (3.3 x 3.4 x 1.0”)
Polarity: White lead is positive
Output Lead: Leads 2.7 m (8 ft) twisted pair 22 AWG
Operating Temperature: Maximum 105°C (220°F)
OTHER FEATURES
Window Size: 3.18 cm (1.25”)
Weight: 340 g (12 oz)
Dielectric Strength: 5000V around the case; 600V rated leads
Storage Temperature: Maximum 105°C (220°F)
Case Protection: Epoxy encapsulated housing
SAFETY SPECIFICATIONS
ETL Listed: Compliant with IEEE C57.13-1993
Working Voltage: Maximum 600 Vrms
Product brochures
No user reviews available.
