Dent CT-SCL-0600-U Current Transformer

Dent CT-SCL-0600-U Current Transformer

Model: CT-SCL-0600-U

Large Split Core Current Transformer. 600A.

$80.00 USD

2 to 3 Weeks

The low-cost solution for permanent or long-term studies. The split core design means no de-energizing or wire disconnection required.

Opening "Split-Core" Current Transformer (SCT) provides linear output voltage that is directly proportional to the input current. This current transformer is easily and safely installed over existing electrical power lines without disconnecting the lines or interrupting service.

DENT's energy monitoring components are used for a variety of applications including building automation, tenant submetering, performance verification, energy management and new technology assessment.

CT-SCL-0600-U Specifications

Key Specifications
Window Size2.0" (5.1 cm)
Current Range30 - 780A AC
Output333 mV @ rated current
Ratio Error*<1.0% at rated current (typical)
Phase Error*<2.0° at rated current (typical)
Output333 mV @ rated current
Wire PolarityWhite = Hi, positive (+)
Black = Low, negative (-)
Frequency Range50 to 400 Hz
Case MaterialEpoxy encapsulated housing
Leads2.7 M (8’), twisted pair, 20 AWG
Operating Temperature–20° to 55°C (-4° to 131°F)
Storage Temperature-20 to 85°C (-4 to 185°F)
Working Voltage600 VAC, Category III
Dielectric Strength5000 VAC around case
600V rated leads
Certification Conforms to: UL STD 61010-1 EN 60044-1 Certified to: CAN/CSA STD C22.2 No. 61010-1
Click here for complete specifications on the Dent CT-SCL-0600-U

Ask a question about the Dent CT-SCL-0600-U Current Transformer:

comments powered by Disqus

Review the Dent CT-SCL-0600-U Current Transformer

" data-description="Large Split Core Current Transformer. 600A.">