Fluke 434-II Series of Power Quality Analyzers
Downloads:
datasheet manual



Fluke 434-II Series of Power Quality Analyzers

Model: 434-II | Order No: 434-II Series

Delivers essential power quality monitoring and logging in a compact form. Use as a frontline troubleshooting tool, for predictive maintenance and for long-term load studies. Available as a stand-alone unit or a complete kit including 4x 6000A flexible current transformers.

Help with Ordering

Select a Model

434-II

Fuke 434-II power quality analyzer kit with 4x i430Flex-TF 6000A thin flexible current probes.

$6,299.99 USD

1 to 2 Weeks


434-II/BASIC

Power quality analyzer kit without CTs (Order CTs separately).

$5,699.99 USD

1 to 2 Weeks



Fluke 434-II Offers

The Fluke 434 Series II Power Quality and Energy Analyzer is the world's only Power Quality analyzer that can monetize the cost of energy waste due to poor power quality and is ideal for characterizing power quality, conducting load studies and capturing hard-to-find voltage events over a user-defined period of time. The Fluke 434 II Energy Analyzer is the ideal tool for advanced energy logging and energy monetization, identifying the most energy-wasteful areas of your facility.

Features

  • These power quality and energy analyzers help locate and predict, prevent and troubleshoot power quality problems in three-phase and single-phase power distribution systems
  • Energy Loss Calculator: classic active and reactive power measurements, unbalance and harmonic power, are quantified to pinpoint true system energy losses in dollars
  • Power Inverter Efficiency: Simultaneously measure AC output power and DC input power for power electronics systems using optional DC clamp
  • Troubleshoot Real-time: Analyze trends using cursors and zoom tools
  • Measure all Three Phases and Neutral: With included flexible current probes (4) with enhanced thin flex designed to fit into the tightest places
  • Automatic Trending: Every measurement is always automatically recorded, without any set-up
  • System Monitor: Ten power quality parameters on one screen according to EN61060 power quality standard
  • Logger Function: Configure for any test condition with memory for up to 600 parameters at user defined intervals
  • View Graphs and Generate Reports: With included analysis software
  • Battery Life: Seven hours of operating time per charge on Li-ion battery pack
  • Automatic Transient Mode: Capture 200kHz waveform data on all phases simultaneously up to 6kV
  • Fully Class A Compliant: Conduct tests according to stringent international IEC 61000-4-30 Class A standard
  • Mains Signalling: Measure interference from ripple control signals at specific frequencies

Specifications

Model Measurement range Resolution Accuracy
Vrms (AC/DC) 434-II 1 V to 1000 V phase to neutral 0.1 V ± 0.5% of nominal voltage****
Vpk 1 Vpk to 1400 Vpk 1 V 5% of nominal voltage
Voltage Crest Factor (CF) 1.0 > 2.8 0.01 ± 5 %
Vrms½ 434-II 1 V to 1000 V phase to neutral 0.1 V ± 1% of nominal voltage
Vfund 434-II 1 V to 1000 V phase to neutral 0.1 V ± 0.5% of nominal voltage
Amps (AC/DC) i430-Flex 1x 5 A to 6000 A 1 A ± 0.5% ± 5 counts
i430-Flex 10x 0.5 A to 600 A 0.1 A ± 0.5% ± 5 counts
1mV/A 1x 5 A to 2000 A 1A ± 0.5% ± 5 counts
1mV/A 10x 0.5 A A to 200 A (AC only) 0.1 A ± 0.5% ± 5 counts
Apk i430-Flex 8400 Apk 1 Arms ± 5 %
1mV/A 5500 Apk 1 Arms ± 5 %
A Crest Factor (CF) 1 to 10 0.01 ± 5 %
Amps½ i430-Flex 1x 5 A to 6000 A 1 A ± 1% ± 10 counts
i430-Flex 10x 0.5 A to 600 A 0.1 A ± 1% ± 10 counts
1mV/A 1x 5 A to 2000 A 1A ± 1% ± 10 counts
1mV/A 10x 0.5 A A to 200 A (AC only) 0.1 A ± 1% ± 10 counts
Afund i430-Flex 1x 5 A to 6000 A 1 A ± 0.5% ± 5 counts
i430-Flex 10x 0.5 A to 600 A 0.1 A ± 0.5% ± 5 counts
1mV/A 1x 5 A to 2000 A 1A ± 0.5% ± 5 counts
1mV/A 10x 0.5 A A to 200 A (AC only) 0.1 A ± 0.5% ± 5 counts
Hz Fluke 434 @ 50 Hz nominal

42.50 Hz to 57.50 Hz

0.01 Hz ± 0.01 Hz
Fluke 434 @ 60 Hz nominal 51.00 Hz to 69.00 Hz 0.01 Hz ± 0.01 Hz
Watts (VA, var) i430-Flex max 6000 MW 0.1 W to 1 MW ± 1% ± 10 counts
1 mV/A max 2000 MW 0.1 W to 1 MW ± 1% ± 10 counts
Power factor (Cos j/DPF) 0 to 1 0.001 ± 0.1% @ nominal load conditions
kWh (kVAh, kvarh) i430-Flex 10x Depends on clamp scaling and V nominal ± 1% ± 10 counts
Energy loss i430-Flex 10x Depends on clamp scaling and V nominal ± 1% ± 10 counts Excluding line resistance accuracy
Harmonic Order (n) DC, 1 to 50 Grouping: Harmonic groups according to IEC 61000-4-7
Inter-Harmonic Order (n) OFF, 1 to 50 Grouping: Harmonic and Interharmonic subgroups according to IEC 61000-4-7
Volts %f 0.0 % to 100 % 0.1 % ± 0.1% ± n x 0.1 %
%r 0.0 % to 100 % 0.1 % ± 0.1% ± n x 0.4 %
Absolute 0.0 to 1000 V 0.1 V ± 5% *
THD 0.0 % to 100 % 0.1 % ± 2.5 %
Amps %f 0.0 % to 100 % 0.1 % ± 0.1% ± n x 0.1%
%r 0.0 % to 100 % 0.1 % ± 0.1% ± n x 0.4 %
Absolute 0.0 to 600 A 0.1 A ± 5% ± 5 counts
THD 0.0 % to 100 % 0.1 % ± 2.5 %
Watts %f or %r 0.0 % to 100 % 0.1 % ± n x 2%
Absolute Depends on clamp scaling and V nominal - ± 5% ± n x 2 % ± 10 counts
THD 0.0 % to 100 % 0.1 % ± 5 %
Phase Angle -360° to +0° ± n x 1°
Plt, Pst, Pst(1min) Pinst 0.00 to 20.00 0.01 ± 5 %
Volts % 0.0 % to 20.0 % 0.1 % ± 0.1 %
Amps % 0.0 % to 20.0 % 0.1% ± 1 %
Threshold levels Threshold, limits and signalling duration is programable for two signalling frequencies
Signalling frequency 60 Hz to 3000 Hz 0.1 Hz
Relative V% 0 % to 100 % 0.10 % ± 0.4 %
Absolute V3s (3 second avg.) 0.0 V to 1000 V 0.1 V ± 5 % of nominal voltage
Click here for complete specifications on the Fluke 434-II

Accessories

Click on a category to view a selection of compatible accessories with the Fluke 434-II Series of Power Quality Analyzers.

Fluke WC100 multi color wire clips WC100 9135
For use with Fluke 430-Series power quality analyzers.
$39.99 USD

Learn More

Fluke i5sPQ3, 5A AC Current Clamps, 3-pack I5SPQ3 3023
A pack of 3 pieces of the i5s current clamps, specially configured to provide low current accuracy while taking measurements on secondary current transformers.
$1,299.99 USD

Learn More

Fluke i200s AC Current Clamp I200S 1555
200A AC current clamp with BNC terminated lead.
$249.99 USD

Learn More

Fluke i400S AC Current Clamp I400S 1825
400A AC current clamp with BNC terminated lead.
$289.99 USD

Learn More

Fluke i1000s AC Current Clamp I1000S 1820
1000A AC Current Clamp with BNC terminated lead.
$574.99 USD

Learn More

Fluke i2000 FLEX Flexible AC Current Probe I2000-FLEX 1823
2000A flexible AC current transformer for Fluke power quality analyzers.
$399.99 USD

Learn More

Fluke i3000s AC Current Clamp I3000S 1556
3000A AC current clamp with BNC terminated lead
$624.99 USD

Learn More

Fluke i3000s Flex-24 Flexible AC Current Probe, 24 inch length I3000S-FLEX-24 4624
Flexible 24" 3000A AC current probe with BNC terminated lead.
$524.99 USD

Learn More

Fluke i6000s Flex-24 AC Current Probe I6000S-FLEX-24 5937
Flexible 24" 6000A AC current probe with BNC terminated lead.
$699.99 USD

Learn More

Fluke i6000s Flex-36 AC Current Probe I6000S-FLEX-36 5936
Flexible 36" 6000A AC current probe with BNC terminated lead.
$799.99 USD

Learn More

Fluke i30s AC/DC Current Clamp I30S 4619
30A AC/DC current clamp with BNC terminated lead.
$624.99 USD

Learn More

Fluke 80i-110s AC/DC Current Clamp 80I-110S 1530
100A DC/70A AC current clamp with BNC terminated lead.
$799.99 USD

Learn More

Fluke 90i-610s AC/DC Current Probe 90I-610S 1533
600A AC/DC current clamp with BNC terminated lead.
$499.99 USD

Learn More


Fluke AC285 SureGrip Large Alligator Clip AC285 1403
Large alligator clip for test leads used with Fluke meters.
$24.99 USD

Learn More

Fluke BB120 Shielded Banana to Female BNC Adapter BB120 1539
Shielded Banana to Female BNC Adapter for Fluke meters and probes.
$39.99 USD

Learn More

Fluke BP290 Li-Ion Battery Pack BP290 9158
For Fluke 43X power quality analyzers and 190-series ScopeMeters.
$249.99 USD

Learn More

Fluke BP291 Double Capacity Li-Ion Battery Pack BP291 8807
For Fluke 43X power quality analyzers and 190-series ScopeMeters.
$349.99 USD

Learn More

Fluke EBC290 External Battery Charger EBC290 8793
External battery charger for BP290-Series Li-ion batteries for Fluke ScopeMeters and power quality analyzers.
$129.99 USD

Learn More

Ask a question about the Fluke 434-II Series of Power Quality Analyzers:

comments powered by Disqus

Review the Fluke 434-II Series of Power Quality Analyzers

" data-description="Delivers essential power quality monitoring and logging in a compact form. Use as a frontline troubleshooting tool, for predictive maintenance and for long-term load studies. Available as a stand-alone unit or a complete kit including 4x 6000A flexible current transformers.">